General characteristics 4 guideways lathes WH: WH1 – WH2 – WH3

These machines are designed for medium-heavy duty tasks (turbine shafts, hydraulic cylinders, wind turbine masts and so on).

WH lathes are really multitask centres, suited for high performed turning, boring, milling and grinding operations.

Using axis X, Z, C, Y and B, complex parts can be machined on five sides.

The machine’s ergonomic feature allows the operator a good visibility throughout the various stages of machining, as well as eases of clamping, and check the product once it is finished.

 

  • Data sheet

     


    WH1


    WH2


    WH3

    Caratteristiche tecniche principaliWH1 550WH2 850WH2 950WH3 1000WH3 1200
    CENTRES HEIGHT mm 550 850 950 1.000 1.200
    SWING OVER BED mm 1.100 1.600 1.800 1.900 2.300
    SWING OVER CARRIAGE mm 1.000 1.200 1.400 1.900 2.300
    DISTANCE BETWEEN CENTRES m 3-4-6-8-10 4-6-8-10-12-14-16 6-8-10-12-14-16-20-24
    MAX. WEIGHT ALLOWED (without steadies) Kg 8.000 15.000-25.000(*) 25.000-30.000(*)
    SPINDLE BORE mm 120-140(*) 150 120
    SPINDLE NOSE ASA 11"-15"(*) 15"-20"(*) 15"-20"(*)
    DIAMETER TAILSTOCK QUILL mm 195 230-330(*) 330-360(*)
    SPINDLE MOTOR IN S1 kW 28-37(*) 55-71(*) 71-105(*)
    SPINDLE SPEED giri/min 2-1.100 2-650 2-450

    CNC Fagor - Fanuc - Siemens

  • standard equipment

    • Headstock with n. 2 automatic ranges
    • Tailstock with inner rotating quill
    • Carriages slides on antifriction material
    • Double stabilization of cast iron and of hardened slideways
    • Ground high precision ball screws
    • Centralized lubricating, operated by CNC, for headstock, slideways and ball screws
    • Front chip conveyor
    • Back chip tray
    • Sliding front protection for operator
    • Electronic handwheel
    • CNC with ISO programmation and 
      teach-in
    • Serial output RS232
    • Reduction sleeve and n. 2 dead centres
    • Manual hook of tailstock to the carriage
    • Machine design complying with the European Security Norms (CE)

  • optional equipment

    • Tailstock with mechanic-hydraulic clamping/unclamping
    • Motorized tailstock with automatic movement
    • Tailstock quill with hydraulic movement and compensation for thermal expansion of the piece
    • Boring bar up to 320 mm
    • Double front door
    • Manual plate and chuck
    • Hydraulic and pneumatic chuck
    • Boring bar holder Ø 160 mm on the carriage
    • Back chip conveyor replacing back chip tray
    • Air conditioning system for electric box
    • Manual turrets
    • 4 positions automatic turrets
    • 8/12 positions automatic disk type turrets with or without motorization
    • “C-Axis” continuous with movement through the spindle motor or independent motor
    • Hydraulic steady rest controlled by CNC 30-245
    • Hydraulic steady rest controlled by CNC 45-310
    • “C-type” steady rest
    • Steady rest 40-400 mm
    • Steady rest 400-600 mm
    • Steady rest 400-600 mm (only for centres height 550 mm)
    • Grinding unit
    • Milling unit ISO 40
    • Milling unit for Y axis
    • Probe for piece measurement
    • Probe for tool wear measurement
    • Teleservice

                                                                  (*) Opzionale

Gallery